Practicality and versatility combined with modern styling are the key features which make the Royal one of the most popular chairs on the market. Large supportive wings ensure the cushions are held in position while the three bolster cushions, each removable with its own zipped personalised configuration. Available on the following mechanisms: Single motor wall-hugger, Dual, Tilt-In-Space Single, Tilt-In-Space Dual, Recline only, Low Profile Single, Low Profile Dual, Manual, Recline only, Static, Heavy Duty. Available in a variety of sizes.
An online community of and for disabled people supporting and helping each other by sharing our experiences.
If you spend long periods of time in a sitting position it is vital that you have a chair that is tailored to your needs to maintain comfort, well-being and independence. Your size, height, degree of mobility and any existing pain can influence your choice.
There are a number of factors about yourself to consider:
All of these can be affected by many things including age, tiredness, a medical or physical condition, medicines, sight and cognitive ability. Consider how all these factors will be affected by, and will affect, your use of the chair. As well as comfort, it is important that you consider safety when choosing a chair.
Consider the activities you wish to do (e.g. moving about, socialising, watching television, reading, using the telephone, writing, drinking, eating, knitting) when buying or adapting a chair. Different activities require different amounts of space for movement, different postural positions, degree of support and level of comfort.
It is good to move around regularly throughout the day. Try to use other chairs, if they are safe and comfortable, to carry out your different activities. For example:
The internal dimensions of the chair - seat height, width and depth and backrest height - need to match your size to ensure it offers adequate support. When you are sitting, the support that the chair gives you from underneath should be evenly spread beneath your bottom and legs, with no particular points of pressure. The support to your back should enable you to relax, helping you to keep a safe and comfortable position, again with no particular points of pressure.
It is also worth bearing in mind the overall dimensions of the chair if space is limited. If the chair is going to be reclined regularly, make sure that there is sufficient room behind the chair for the backrest to move into.
It is advisable to try out a range of chairs before buying as slight differences in the slope and angle of the backrest, or the position and style of armrests, can make a huge difference to individual comfort.
The height of the seat can determine how easy it is to get in and out of the chair.
To measure the height of the seat of your current chair, make sure you do this when you are sitting in it, taking into account the amount that the cushion or seat compresses. The seat height of a well-used older chair with softer cushions is likely to be significantly lower.
Most high seat chair manufacturers have a range of chairs with a seat height between 46-59cm (18-24in). Some will make other heights to order. If you need a very high seat to make standing easier, but need support for the feet when seated, try using a footstool, but make sure you can push it out of the way easily before standing up.
If you struggle to get on/off a chair, you may also be experiencing difficulty transferring to/from a toilet. You may benefit from a grab rail on the wall by the toilet, a raised toilet seat or a seat and frame over the toilet.
The seat should be wide enough to allow you to sit comfortably whilst reading, writing or knitting, but narrow enough to enable you to make use of the armrests. Ideally, it should be the width of the widest part of your bottom/hips plus approximately 5cm (2in) on either side.
Seat depth (front to back)
The seat needs to be deep enough to support the full length of the thighs. If the seat is too deep, you will have to lean back to provide support for your shoulders. This may cause you to slump in the chair and the cushion may rub behind your knees. A deep seat may also cause your bottom to slide forwards in the chair. If it is too shallow, your thighs will not be supported properly and after a while you may be uncomfortable.
To calculate the correct depth, ensure you are sat with your bottom at the back of the chair, with your lower back supported by the back of the chair. Use a firm cushion to support your lower back if you need to. Measure the distance from the chair back, or the cushion, along the thighs to approximately 3cm (1.5in) behind the back of your knees. You may need to allow more space if your calf muscle is particularly curved.
Backrest height and shape
Your back and head should be supported, especially if the backrest is going to tilt backwards. When sitting, measure from the seat to the top of your ears to give you an idea of minimum height required.
Comfort is often determined by the shape of the backrest. It should be gently curved to match the natural curves of the spine and provide good support, particularly around the small of the back and the head.
Many older people have a rounded back and shoulders which make it difficult to get the correct support unless special cushions are used. People with a marked curvature of the spine may find a softer, canvas or angled backrest more comfortable.
The backrest should be angled slightly backwards. If it is too upright, it can be tiring as you will constantly be trying not to lean forwards. However, if it slopes too far back it may force you to slide forwards on the seat.
Adjustable headrests can be positioned where the support is most needed. They should be easy to adjust and be secure when fixed. Some wrap around the back of the chair and the height can be adjusted. Others are on bands which lie over the top of the chair back and are fixed behind.
These do not have any real functional purpose so it is down to personal preference whether you choose a chair with wings. They may help to support your head if you have a tendency to fall asleep in your chair. Whenever possible it is better to lie down on your bed to have a proper sleep rather than to catnap. Even if the wings can provide some support for your neck, leaning your head to one side puts a great strain on the muscles and ligaments in your neck and this can lead to pain and stiffness. As the wings can block your sideways visibility you may have to lean forwards to see round them, although they may offer some protection from draughts.
These should provide side support and help you to stand up and be wide enough to support your forearms when relaxing. Padded armrests provide more comfort. When seated in the chair your forearms should rest comfortably along the armrest without hunching your shoulders or leaning to one side.
To help you stand up, the ends should be easy to grip and level with the front edge of the seat. Those made of bare wood with rounded ends are ideal. Armrests that have padded or have scrolled ends may be more difficult to grip and those with square fronts may be painful to push down on.
The armrests should be at least the same length as the seat. If they project further forwards to give more support when standing, the front legs of the chair should be splayed.
Drop-down or removable armrests can help you get in and out of the chair from the side, e.g. from a wheelchair. Filled in armrests may be warmer and exclude draughts and small objects such as TV remote controls are less likely to fall onto the floor. Smokers should be aware that lighted cigarettes, if dropped, will get trapped and be a potential fire hazard.
Usually chair seats have springs or are foam filled. If the seat is too hard, it may feel uncomfortable to sit on; if it is too soft, the chair frame may protrude through the cushion. Chairs should be made of good quality foam so that the air can flow freely within them. Cheaper foams give good support initially, but may sag after only a few months.
Some suppliers now incorporate pressure relieving features in the standard seat which may be worth considering if you find it difficult to adjust your position or sit for long periods.
These can be splayed or straight. Splayed legs offer greater stability, especially when someone is pushing down on the armrests. If they stick out too far, they may get in the way.
If the front legs are joined by a cross bar or are filled in with upholstery you may not be able to position your feet under the chair. This could make standing up more difficult. They can also get in the way if you use a hoist for getting in and out of the chair.
Ideally, this should be warm and slip-resistant. If possible avoid materials that cause sweating. Manufacturers offer a wide range of upholstery in a variety of colours and designs. Some companies will also allow buyers to send them their own choice of fabric.
Although vinyl can be cleaned easily, it tends to be slippery and can cause sweating. A sheepskin cover is soft and warm and will absorb moisture; it also allows the air to circulate so that you do not become too hot. For people who have continence problems, there is a choice of upholstery that is waterproof and has an attractive finish.
The larger/smaller user
If you are very small or very large you may find it difficult to get a chair which is the correct size. Some suppliers will make modifications, such as reducing the seat width and depth for a small person, or reinforcing chairs for someone who is heavier. It is important to know your weight before purchasing a chair. Always check the capacity of the chair to ensure that it is strong enough to take your weight.
If you have a chair adjusted to your particular needs it will cost more than buying a conventional high seat chair. A custom-made chair will be even more expensive. The manufacturer will arrange for a home assessment; but remember that although these companies employ highly trained reps, most of them do not have a medical background. You are advised to ask an occupational therapist or physiotherapist to be present at the assessment.
All upholstered furniture that is intended for private use in a house needs to conform to the Furniture and Furnishings (Fire) (Safety) Regulations 1988 (as amended in 1989, 1993 and 2010). Within each standard there are several parts with tests of increasing severity. Check with suppliers which parts have been met.
Many people find it difficult to get in and out of a chair, especially if it is a low sofa type. Reasons for difficulty include painful or stiff joints, muscle weakness, slow reactions or impaired balance. If you are finding it difficult, the various options that can be considered to make it easier include:
It is useful to look at how you are standing up and sitting down. Ask for an assessment by an occupational therapist or physiotherapist or if you are struggling, lacking in confidence, or uncertain of the best technique.
The following sequence of actions may help you to stand up:
If you are using a walking frame, do not pull yourself up on a walking frame or another piece of furniture as they are not secure. Only reach for a walking frame once you are in a stable upright position.
Similarly, this sequence of actions may help with sitting down:
Chair raisers increase the height of the legs of the armchair, therefore also increasing the height of the seat and the armrests. This makes it easier to stand up and sit down. This is better than raising the height of the seat by adding more cushions - this has the effect of lowering the armrests and in turn they offer less assistance.
Chair raisers are bought in sets of four and are placed under, or clamped onto, the legs of a chair. Some sets come as four individual blocks, others are connected by adjustable length cruciform arms. The latter tend to be more stable. Chairs that are placed on blocks can be quite difficult to move. Always ensure that the appropriate shape or model of raiser is used for the shape of the chair leg and that the original chair legs and the raisers are absolutely secure. Once fitted the chair should not move or wobble as you use it.
A static standing frame is a strong metal frame which adjusts to fit under a bed, sofa or chair. There are two handles which extend upwards from the base to provide support for you to push against when standing or sitting. The version for use with a sofa has fold-down handles which allow you to turn and put your feet up if you wish.
If you are unable to raise your existing chair or use a static standing frame, you will probably consider buying a high seat chair or sofa. These lounge or fireside chairs have a high firm seat, stable armrests and a high supportive backrest. They are available in a wide range of designs and colours.
More clinical looking hospital armchairs are also available, which may be cheaper than the wooden framed domestic models. Although they have metal frames and vinyl covers, they can be comfortable and easy to get out of.
These are static cushions providing additional height. These can be used in a standard chair and may suit if your need is only short term. The riser cushion is either placed directly on top of the seat cushion or the chair cushion is removed and the riser cushion placed on the base of the chair. It adds to the overall height of the seat but has the effect of lowering the armrests, so that they offer less assistance. As riser cushions tend to be smaller than the dimensions of most seats, they may be uncomfortable to sit on for any length of time. If you are at risk of developing a pressure ulcer you should seek the advice of an occupational therapist before purchasing one.
The units are portable so that they can be used when visiting friends or going out - some even have a carrying handle. There is a limited choice of colours and the covers are usually vinyl or fabric.
These are cushions with a spring or hydraulically operated mechanism underneath which, when activated, tilts the seat surface forward to assist you to get out of the chair. The mechanism can be adjusted according to your weight. More sophisticated models have a combination of seat lift and tilt which provides a better position for standing. They should only be used with an armchair and should replace the original cushion. If you place the riser/lift cushion on top of the original cushion it gives more height, but it may be less stable and it effectively reduces the height and usefulness of the armrests.
The riser/lift cushion should fit well within the chair without too much movement. With all riser/lift cushions and chairs consider that the mechanism may be an entrapment risk. Under British Standard BS8474 some chairs now have safety devices to stop this. If you are concerned, look for a chair that meets this standard.
The following points should be considered:
A few powered portable lifting seat units or cushions are available. They tend to have a larger seat than many manual riser units and, as a result, are slightly more comfortable. One advantage of a powered unit is that the lifting action is not weight specific, although you need to check your weight is within the maximum capacity of lift. The movement is usually controlled by levers or buttons on a handset. As they are powered by mains electricity, the units will need to be positioned on a chair near a suitable socket.
Manual riser chairs have seats that are hinged at the front edge. When the seat locking mechanism is released a gas or spring operated mechanism tilts the seat forward to help you stand up. If using a riser chair, it is important that you have the ability to bring your weight forward and to initiate a push on the armrests. It is also essential that you can position your feet correctly before the seat starts to rise up.
A very few manually operated riser chairs without a seat locking mechanism may still be available, especially in the second hand market. They should only be used in exceptional circumstances, e.g. if the user is unable to operate a locking mechanism due to painful or weak fingers.
Less effort is required to stand up from these chairs than from manual seat lift chairs, but the action tends to be much slower. It is important you have the ability to re-adjust your position as the chair rises. If your feet are not positioned correctly you may lose your balance when the chair is in the raised position.
Powered riser chairs use mains electricity and need to be placed within easy reach of a socket. They also tend to be larger than other chairs and take up more space. Check with the companies whether they can make a chair with smaller dimensions if needed.
The control handset for powered chairs usually has push buttons or rocker switches. The latter are easier to use if you have limited hand function. The more buttons or switches there are, the more complicated they are to use. Where appropriate it is probably wise to have a chair with fewer functions and simpler controls.
There are three different types of powered riser chairs:
Most powered riser chairs are now of the type where the whole chair rises and the seat tips forward. To use these chairs safely it is important you have sufficient strength and control of your trunk and legs. There is a risk you may slip down as the chair rises if your legs are too weak. You need to be aware of your current and possible future ability if your condition is changing.
As with all mechanisms, there may be an entrapment risk. Under British Standard BS8474 some chairs now have safety devices to stop this. If you are concerned, look for a chair that meets this standard.
As the seat rises, this type of chair leaves the back and armrests behind. When the chair is in it's up position the armrests are not at a convenient height to push against and the person has no back support. This kind of chair may be useful to someone who is transferring into an adjacent wheelchair, as the seat rises above the armrests so that they do not impede the transfer. Transferring back into the chair from a wheelchair may not be any easier.
It is possible for objects such as TV remote controls to disappear into the gap between the seat and backrest.
These chairs have a mechanism that lifts both the seat and the armrests up and forwards so that the user is still able to push down against the armrests when standing up. However, there is no back support when the chair is in a raised position.
Usually, these chairs have a mechanism that lifts the whole chair, including the seat, backrest and armrests up and forwards. They provide users with all round support when in a semi-standing position as well as making it possible for them to push down against the armrests, enabling them to stand up more easily.
A few chairs have a seat that rises vertically without tipping forward (vertical lift option). This is safer for people who need to remain secure for longer and need more time to adjust to the higher position. It is also easier if you use a level sliding transfer especially when the arms of the chair drop down or can be removed. Some companies offer the vertical rise as an option to the standard rise and tip forward.
Reclining chairs enable you to alter your position during the day. These are useful if you have a back problem, if you need to relax or sleep during the day or if you have muscle weakness and find it difficult to support your head.
Reclining chairs generally have leg rests that lift up to support your calves. You need to take care not to trap your legs underneath the leg rests or between the top edge of the leg rest and the chair cushion.
The leg rest on many recliners operates simultaneously with the backrest, which is ideal if you only use the chairs for sitting or lying. However, on some models the backrests and leg rests can be operated independently. These may be more suitable if you need to elevate your legs while sitting up.
If you need to recline the backrest without elevating the leg rest, you may tend to slide forward on the seat. In this case, a chair with a tilt-in-space mechanism (where the seat and backrest tilt backwards maintaining a 90° angle between them) may be the best option (see the section on multi-adjustable deep seat chairs).
Some arm and upper body strength is needed to activate the movement of these chairs. A lever/handle is used to release the reclining mechanism while you lean back. Some require you to push back on the armrests, others to pull the armrests backwards.
If this is not possible and the chair needs to be operated by someone else, ensure that the backrest can be reclined and re-positioned when the user is in the chair. If you are buying a chair with a built-in footrest, make sure that you are able to place your feet on the floor under your knees when preparing to stand up. Some footrests prevent you from doing this when they are lowered.
Most of these chairs have a fairly high seat and tend to be wider and more padded than fireside chairs. Because they need a power supply they must be positioned near to a power point to avoid the hazard of a trailing flex.
They are controlled by a handset which may have push buttons or a rocker switch. A person with weak hands may find the latter easier to use. Castors on these heavy chairs enable them to be moved more easily.
These recline in the same way as those mentioned above, but they also have a seat lift. On most models the whole chair rises, which provides the user with support and leverage to get out of the chair.
Sleeping during the night in a standard electric recliner is not generally recommended, except where there is no other option. The chair will need to recline to a horizontal position. If the backrest only reclines partially, it is difficult to maintain postural alignment and this may lead to stiffness and pain in the joints.
A chair bed is like a reclining chair which reclines and lifts the legs fully to assume an almost horizontal surface. When fully reclined with the leg rests elevated, chair beds take up significant space. Ensure that there is enough room behind and in front of the chair so that it can be operated safely and there is room to get in and out of it as required.
You may need to sit with your feet up (elevated), either purely for comfort or for medical reasons, e.g. if you have stiff or swollen legs. If your doctor or therapist has advised you to sit with your legs elevated you should ask him/her how your legs should be supported. For instance, if you have swollen feet or ankles you may need to have your legs supported to at least a horizontal position, if not higher, to reduce the swelling effectively. If you have arthritis in your knee, it may need to be kept as straight as possible. Therefore before purchasing or hiring a leg rest or footstool ensure that it will be suitable for your particular needs.
A footstool only supports the feet and ankles and is usually lower than a leg rest. A footstool may not be suitable if you have a painful, stiff or weak knee, as your knee will remain unsupported. This can put strain on the ligaments behind the joint and could lead to discomfort.
Fixed height foot and leg rests should be tried out for comfort before purchase as they cannot be adjusted to suit the individual user. Footstools and leg rests which are height adjustable, or which have an adjustable angle top, will be more adaptable to your comfort and needs.
A leg rest should support the legs from the chair edge right down to the feet, providing even support along your lower leg and heel. It is important that the weight of your lower legs is not resting on one point, such as your heels, as this will quickly lead to soreness. An adjustable or tilting leg rest will provide a comfortable support and will distribute the pressure evenly. Many are available with T-shaped legs and a slightly concave top. Most are available with a choice of vinyl or fabric upholstery and wooden or metal frames.
L-shaped rocking leg rests adjust automatically to the angle of the user’s legs. Most have one long and one shorter side, providing a downward support for the calves with support at right angles under the soles of the feet.
The weight of the footstool or leg rest needs to be considered. You need to be able to move it out of the way when you stand up and put back in place when you are seated. Some leg rests have castors which can assist in moving them.
Some people will find it difficult to lift their feet onto or off a footstool or leg rest. Manual leg lifters are simple tools to help. They comprise a strap with a loop at the end into which you place your foot. You need adequate strength and dexterity to carry out the task. Some people use the crook neck of a walking stick instead.
Mains powered leg lifters work in a similar way to the built-in leg rest on a reclining chair. The device is attached between the two front chair legs and is hinged at the top. It rises from a vertical down position, through a 90° arc to form a horizontal surface. The mechanism is controlled by a hand-held switch and may operate via a hydraulic mechanism or inflatable air bag powered by a compressor.
Many reclining chairs have a built-in leg rest which operates simultaneously with the backrest. This is ideal if people are using the chairs only for sitting or lying. However, those who want to sit with their feet up while watching television for instance, may find models with independently operating backrests and leg rests more suitable. These enable the leg rest to be raised, even though the backrest is still up straight.
Consider the amount of support that these types of leg rests provide, as some only support from halfway down the calves rather than from the edge of the seat.
Chairs with independent backrest and leg rest operation have two motors and more buttons to push. You may choose a chair with simultaneous backrest and leg rest operation because the controls are simpler.
As with all mechanisms, there may be an entrapment risk. Under British Standard BS8474 some chairs now have safety devices to stop this. If you are concerned, look for a chair that meets this standard.
Many people are not able to maintain a stable and comfortable seated position. This might be for a number of reasons, including muscle weakness or spasm, joint pain, stiffness or deformity, loss of balance or pressure ulcers. A stable sitting position should be one that requires minimum effort to maintain. If you can’t keep a comfortable stable position it can become very tiring. It is essential that anybody who has complex seating needs should be assessed by an occupational therapist or physiotherapist who will be able to identify what the particular difficulties are and what might be the best solution.
In this situation seek a referral to a specialist seating clinic. Such clinics will carry out an assessment and provide advice on seating in chairs and wheelchairs. The clinics usually need a referral from your GP, an occupational therapist or physiotherapist.
These are usually standard wooden framed high seat chairs that have an adjustable seat which can be sloped slightly backwards. Most also have an adjustable backrest that can be slightly reclined so that the overall seat/backrest angle remains at a comfortable 90 degrees. This type of chair may be suitable for somebody who tends to slide or fall forwards in the chair or has difficulty holding his/her head up.
These chairs have a very deep, backward sloping seat that will provide stability for someone with weak muscles, someone who goes into spasm or experiences involuntary movements. Some have gate-opening armrests to help the user to get in and out.
It is important to consider the following points:
Some deep seat chairs are cube-shaped. They are foam filled with a deep sloping seat, high sides and wide padded armrests. Most have vinyl or easy-to-clean covers. They do not offer much postural support and have a low back which does not support the head.
As the whole chair is made of foam it does not provide any rigid support, either for the user or the carer, when someone is getting in and out of it. It would be advisable to use a hoist to lift someone in and out of these chairs but an overhead hoist may be the only option, as many of the chairs are wide and have insufficient space underneath to accommodate any other type of hoist.
These are multi-adjustable wooden framed padded chairs or metal-framed upholstered chairs that can be tailored to individual needs.
The height, width, depth and angle of the seat on most of these chairs is adjustable, as is the angle of the backrest. Some have a tilt-in-space mechanism, so that the whole seat and backrest unit can be angled backwards to provide a deep seat and then moved forwards again to a horizontal position to make it easier when getting in and out.
They have additional side and head supports that can be fitted and adjusted according to the user’s needs. These chairs are more expensive than standard chairs and therefore are likely to be used only by people who have complex seating needs and who require additional postural support. If a hoist is used to transfer the user in and out of the chair, ensure that there is sufficient access for the hoist around or underneath the base.
Modular seating systems are the most adaptable in terms of posture and support and in meeting the most complex needs, but they do tend to have a clinical appearance.
They are multi-adjustable systems, made up of component parts which provide support and stability, and attach to an underlying frame, usually with wheels. Some manufacturers can provide custom moulded components if necessary, e.g. to support a spinal curvature.
Some systems cater for both children and adults. The components can be replaced as the person grows or changes posture.
Some chairs come with an integral pressure relief system, e.g. gel, air or water chairs.
Straps and harnesses are designed to help provide support and safety for the person using the chair, encouraging them to sit in a safe, stable position. However, the chair itself should be the means of providing the key stability and postural support. Any straps or harnesses must be used in line with any instructions or guidance given by the manufacturer or therapist.
Straps can only ever be used to physically restrain a person in extreme circumstances and under guidance, when the person is at risk of severely injuring him/herself. Where a person cannot give consent and measures are taken to restrict a person’s liberty, even in their own home and in their best interests, certain safeguards must be taken. Further information is available from your local authority.
Many people can sit quite adequately in a standard armchair, but need additional support for a specific part of the body in order to feel more comfortable. The most common supports are back and neck cushions.
The following types of back cushions are available:
The following types of neck supports are available:
These cushions can be used either with the thick edge at the front or back of the seat. Having the thick edge of the wedge at the front may be useful for a person who tends to slide forwards in the chair. The cushions can either be secured on top of or beneath an existing cushion or chair seat. Care must be taken that the cushion will not alter drastically the overall height of the seat and make the armrests less effective as a support. Different angled wedges are available.
A wedge cushion can be used in a dining chair or office chair with the thick edge at the back, to encourage a more upright posture when working at a desk or eating.
Although protection for chairs is available, it is best to try to solve the underlying problem first. Seek advice from your GP, district nurse or a local continence adviser. You might like to contact the Continence Foundation.
Many of the standard high seat chairs can either be upholstered with water resistant fabric or can be fitted with waterproof liners between the cushion and its cover. These look more attractive than vinyl covers and are not so slippery. Nor do they cause sweating.
Waterproof pads are absorbent seat pads with a waterproof base layer. The pads are placed on top of the cushion cover or between the cover and the cushion to prevent urine from making the cushion wet. However, these are not an ideal solution, as they tend to crumple up. They can also lead to a loss of dignity if placed on top of the cushion.
Sheepskins do not relieve pressure but can be helpful when used in conjunction with other pressure relieving support systems because wool fibres are naturally resilient and so help to reduce shear forces. They also help to maintain low humidity and temperature by absorbing water vapour and heat. Sheepskins come in three main forms:
This wool fleece on its own leather backing is the most comfortable of the three and reduces shear forces most efficiently. However, great care must be taken when washing, and the fleece must be regularly brushed so that the fibres do not become matted.
These skins are less resilient that a natural sheepskin and therefore do not reduce shear forces as efficiently. Also, they do not absorb heat and moisture so readily. However, they can be washed more easily and effectively.
Natural fleece on a fabric backing
Because it has been removed from its natural backing, the pile on this sheepskin tends to be shorter and therefore provides slightly less resilience. However, this type of skin is easier to wash, although it still needs regular brushing to prevent matting.
Standard chairs and chair accessories are generally regarded as daily living equipment. If you need to change your chair because of a disability your local authority may provide one on loan after an assessment by an occupational therapist or trained assessor. However, budget constraints make it impossible for many authorities to provide this sort of equipment so it is important to ask what you may be entitled to in your area.
Contact your local authority in England, Wales and Scotland, or your regional health and social care trust if you live in Northern Ireland.
Provision may include:
Another source of advice is a disabled or independent living centre. To find a local centre look online, ask your local authority or find a list of centres on the DLF's Living Made Easy website
People with very complex seating needs may be referred to a specialist seating clinic. Such clinics will carry out an assessment and provide advice on seating in chairs and wheelchairs. The clinics usually need a referral from your GP, an occupational therapist or physiotherapist.
You can use direct payments or a personal budget from the local authority to pay for equipment and other one-off purchases that have been identified in your social care assessment. If you use council funding, they have to ensure that the chair meets your needs. You are advised to read your local authorities conditions or guidance on funding your purchase this way. You need to clarify who actually owns the chair and who is responsible for its maintenance or replacement should it be required.